 | |||||||||
| |||||||||
| |||||||||
| |||||||||
| |||||||||
| |||||||||
| |||||||||
|
 | ||||||||||
 | ||||||||||
| ||||||||||
Pumping Systems - Cooling Tower Pump Stainless Steel Mixing Reservoir Tanks | ||||||||||
| ||||||||||
Features and Benefits BERGoffers complete flexibility in pumping assembly designs from dimensions to capacity for any application. Reservoirs are available in mild steel, stainless steel, plastic all mounted on a structural steel base with banding for additional long term structural support. Single pump systems to multiple pumps complete with a magnitude of options such as headers, detached pumping skids for ease of shipment and installation. | ||||||||||
|
Multiple pumps configured on a double-ended tank set or modular detachable pumping for shipping larger tanks |
A BERG Double Pump Tank System incorporates multiple pumps with a baffled holding tank. The chiller pump (usually the smaller one) circulates water / glycol from the hot side of the tank to the chiller module(s) and back to the cold side of the tank. This pump ensures constant flow and pressure required by the cooling tower(s) for maximum efficienc. The process pump (usually the larger one) circulates the chilled water from the cold side of the tank to the process machines and other users. This pump is designed to match both flow and pressure required by the varying process load without affecting the cooling tower operation. |
|
| Standard Features
|
Tank Fittings
Electrical
|
|
Heat Exchanger Isolated Closed Loop Modular Industrial Cooling Tower Pumping Systems | |
| Cooling Tower Pump / Recirculation Pump / Process Pump / Stand-by Pump
|
Standard Units 3/4 to 150 hp Flow Rates from 50 to 8000 gpm or More! All pump starters are panel mounted on the side of tank or remote panel and are pre-wired to the pump motors. Starters can be controlled with manual Stop / Start switches and indicator lights or HMI ( Human Machine Interface ) type Logic Controller. Motor circuits are protected with premium quality overload protection. |
|
| Double Y-Strainer and Pressure Alarm BERG's unique system gives complete protection to water circulation equipment with absolutely no down-time. When water pressure across strainer drops to a selected critical level, the alarm and light are actuated. By manually switching to a secondary filter line, the original filter or strainer may be cleaned while maintaining circulation. |
Central Control Electrical Panel A custom electrical control panel allows one point hookup and may include;
All pump starters, fuses, disconnect, control voltage transformer, run and fail lights, are housed in a common NEMA RATED panel. |
|
BERG offers complete flexibility in pump / tank assembly designs to customize both dimensions and capacity for any application. Reservoirs are available in mild and stainless steel, mounted on a heavy structural steel base, and have steel banding for additional structural support for the reservoir.
Pumps can be single-end mounted or dual-end mounted. Single pumps to multiple pumps complete with pipe headers are available. For large Pump / Tank Assemblies, the pump assembly can be designed to be separate from the reservoir for installation and shipping constraints.
 |  |  |  |  |
| BERG Chilling Systems Inc. - Toronto Ontario Canada Industrial Refrigeration / Commercial Refrigeration / Process Pumps / Process Cooling Systems / HVAC Systems / Cooling Towers Tel: +01 (416) 755-2221 Fax: +01 (416) 755-3874 Email: bergsales@berg-group.com |